dmesg - Western Digital WD5000AAKX-7

Return To Western Digital WD5000AAKX-7 System Information

Linux version 4.8.0-36-generic (buildd@lgw01-18) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 (Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000d947afff] usable
BIOS-e820: [mem 0x00000000d947b000-0x00000000d9a08fff] reserved
BIOS-e820: [mem 0x00000000d9a09000-0x00000000d9b55fff] usable
BIOS-e820: [mem 0x00000000d9b56000-0x00000000d9ef3fff] ACPI NVS
BIOS-e820: [mem 0x00000000d9ef4000-0x00000000da55dfff] reserved
BIOS-e820: [mem 0x00000000da55e000-0x00000000da55efff] usable
BIOS-e820: [mem 0x00000000da55f000-0x00000000da5a1fff] ACPI NVS
BIOS-e820: [mem 0x00000000da5a2000-0x00000000dad7ffff] usable
BIOS-e820: [mem 0x00000000dad80000-0x00000000daff1fff] reserved
BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Inspiron One 2020/0YXG0N           , BIOS A06 08/16/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FE0000000 write-back
  2 base 0E0000000 mask FE0000000 uncachable
  3 base 0DC000000 mask FFC000000 uncachable
  4 base 0DB800000 mask FFF800000 uncachable
  5 base 11F800000 mask FFF800000 uncachable
  6 base 11F600000 mask FFFE00000 uncachable
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
total RAM covered: 4014M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda30-0x000fda3f] mapped at [ffff917c800fda30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff917c80098000] 98000 size 24576
BRK [0x7fe3b000, 0x7fe3bfff] PGTABLE
BRK [0x7fe3c000, 0x7fe3cfff] PGTABLE
BRK [0x7fe3d000, 0x7fe3dfff] PGTABLE
BRK [0x7fe3e000, 0x7fe3efff] PGTABLE
BRK [0x7fe3f000, 0x7fe3ffff] PGTABLE
BRK [0x7fe40000, 0x7fe40fff] PGTABLE
BRK [0x7fe41000, 0x7fe41fff] PGTABLE
BRK [0x7fe42000, 0x7fe42fff] PGTABLE
BRK [0x7fe43000, 0x7fe43fff] PGTABLE
BRK [0x7fe44000, 0x7fe44fff] PGTABLE
BRK [0x7fe45000, 0x7fe45fff] PGTABLE
BRK [0x7fe46000, 0x7fe46fff] PGTABLE
RAMDISK: [mem 0x3337a000-0x359b4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL  )
ACPI: XSDT 0x00000000D9BE4070 000064 (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: FACP 0x00000000D9BED330 00010C (v05 DELL   WN09     01072009 AMI  00010013)
ACPI: DSDT 0x00000000D9BE4170 0091C0 (v02 DELL   WN09     00000000 INTL 20051117)
ACPI: FACS 0x00000000D9EF2080 000040
ACPI: APIC 0x00000000D9BED440 000072 (v03 DELL   WN09     01072009 AMI  00010013)
ACPI: FPDT 0x00000000D9BED4B8 000044 (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: MCFG 0x00000000D9BED500 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
ACPI: HPET 0x00000000D9BED540 000038 (v01 DELL   WN09     01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D9BED578 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D9BEDA10 000926 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000D9BEE338 000B22 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
NODE_DATA(0) allocated [mem 0x11f5f9000-0x11f5fdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000011f5fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000001fffffff]
  node   0: [mem 0x0000000020200000-0x0000000040003fff]
  node   0: [mem 0x0000000040005000-0x00000000d947afff]
  node   0: [mem 0x00000000d9a09000-0x00000000d9b55fff]
  node   0: [mem 0x00000000da55e000-0x00000000da55efff]
  node   0: [mem 0x00000000da5a2000-0x00000000dad7ffff]
  node   0: [mem 0x00000000daff2000-0x00000000daffffff]
  node   0: [mem 0x0000000100000000-0x000000011f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
On node 0 totalpages: 1020241
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13871 pages used for memmap
  DMA32 zone: 887732 pages, LIFO batch:31
  Normal zone: 2008 pages used for memmap
  Normal zone: 128512 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xd947b000-0xd9a08fff]
PM: Registered nosave memory: [mem 0xd9b56000-0xd9ef3fff]
PM: Registered nosave memory: [mem 0xd9ef4000-0xda55dfff]
PM: Registered nosave memory: [mem 0xda55f000-0xda5a1fff]
PM: Registered nosave memory: [mem 0xdad80000-0xdaff1fff]
PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff917d9f200000 s107864 r8192 d31400 u524288
pcpu-alloc: s107864 r8192 d31400 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1004277
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3890572K/4080964K available (8812K kernel code, 1439K rwdata, 3820K rodata, 1552K init, 1296K bss, 190392K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2893.178 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.35 BogoMIPS (lpj=11572712)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 4 ACPI AML tables successfully acquired and loaded

Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff89ced000 - ffffffff89cf5000)
ftrace: allocating 33410 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-3240T CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23145.42 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xd9b56000-0xd9ef3fff] (3792896 bytes)
PM: Registering ACPI NVS region [mem 0xda55f000-0xda5a1fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:31:19, date: 11/30/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF917D99F1D000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF917D99F42800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF917D99F14C00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d09000-0xf7d0900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d06000-0xf7d063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xf110-0xf117]
pci 0000:00:1f.2: reg 0x14: [io  0xf100-0xf103]
pci 0000:00:1f.2: reg 0x18: [io  0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x1c: [io  0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x20: [io  0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 0x24: [io  0xf0c0-0xf0cf]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.5: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.5: reg 0x20: [io  0xf070-0xf07f]
pci 0000:00:1f.5: reg 0x24: [io  0xf060-0xf06f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xf7c80000-0xf7c8ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xd947b000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9b56000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda55f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdad80000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x1000-0x100f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x0400-0x0453] has been reserved
system 00:01: [io  0x0458-0x047f] has been reserved
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io  0x0a00-0x0a2f] has been reserved
system 00:04: [io  0x0a30-0x0a3f] has been reserved
system 00:04: [io  0x0a40-0x0a4f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs ITE8713 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40004000-0x40004fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 39148K (ffff917cb337a000 - ffff917cb59b5000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd547b000-0xd947b000] (64MB) mapped at [ffff917d5547b000-ffff917d5947afff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1512041478.708:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffbdcd40800000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-36-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-36-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306a9, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d6d7cea0e8f669bd202f07c56eca22a865778209'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 9:928:530
tty ttyS10: hash matches
rtc_cmos 00:02: setting system clock to 2017-11-30 11:31:20 UTC (1512041480)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 2893.427 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 2-1.3: new low-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=e004
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: Bluetooth USB Host Controller
usb 1-1.2: Manufacturer: Atheros Communications
usb 1-1.2: SerialNumber: Alaska Day 2006
usb 2-1.3: New USB device found, idVendor=17ef, idProduct=602d
usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3: Product: Lenovo Black Silk USB Keyboard
usb 1-1.4: new high-speed USB device number 4 using ehci-pci
usb 2-1.4: new low-speed USB device number 4 using ehci-pci
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c077
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Optical Mouse
usb 2-1.4: Manufacturer: Logitech
usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6490
usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_HD
usb 1-1.4: Manufacturer: CN0554KP724873BGG06VA03
ata1.01: failed to resume link (SControl 0)
ata2.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: ATA-8: WDC WD5000AAKX-75U6AA0, 19.01H19, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A100, max UDMA/100
ata2.00: configured for UDMA/100
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GTA0N    A100 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1552K (ffffffff89b69000 - ffffffff89ced000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1412K (ffff917cff49f000 - ffff917cff600000)
Freeing unused kernel memory: 276K (ffff917cff9bb000 - ffff917cffa00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[drm] Initialized drm 1.1.0 20060810
hidraw: raw HID events driver (C) Jiri Kosina
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffbdcd40642000, c8:1f:66:38:a2:5b, XID 0c900800 IRQ 24
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 580000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
r8169 0000:03:00.0 enp3s0: renamed from eth0
input: Lenovo Black Silk USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:17EF:602D.0001/input/input5
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
hid-generic 0003:17EF:602D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Black Silk USB Keyboard] on usb-0000:00:1d.0-1.3/input0
input: Lenovo Black Silk USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:17EF:602D.0002/input/input6
random: fast init done
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:48: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
hid-generic 0003:17EF:602D.0002: input,hidraw1: USB HID v1.11 Device [Lenovo Black Silk USB Keyboard] on usb-0000:00:1d.0-1.3/input1
[drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C077.0003/input/input8
hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
clocksource: Switched to clocksource tsc
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Syslog Socket.
random: crng init done
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[270]: Received request to flush runtime journal from PID 1
ite_cir: Auto-detected model: ITE8713 CIR transceiver
ite_cir: Using model: ITE8713 CIR transceiver
ite_cir: TX-capable: 1
ite_cir: Sample period (ns): 8680
ite_cir: TX carrier frequency (Hz): 38000
ite_cir: TX duty cycle (%): 33
ite_cir: RX low carrier frequency (Hz): 0
ite_cir: RX high carrier frequency (Hz): 0
EDAC MC: Ver: 3.0.0
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Registered IR keymap rc-rc6-mce
input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input9
rc rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
ite_cir: driver has been successfully loaded
lirc_dev: IR Remote Control driver registered, major 245
rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
IR LIRC bridge handler initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2:    inputs:
snd_hda_codec_realtek hdaudioC0D2:      Mic=0x18
snd_hda_codec_realtek hdaudioC0D2:      Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6490)
uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
usb 1-1.2: USB disconnect, device number 3
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffbdcd40900000, irq=18
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
usb 1-1.2: new full-speed USB device number 5 using ehci-pci
audit: type=1400 audit(1512041490.766:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=623 comm="apparmor_parser"
audit: type=1400 audit(1512041490.766:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=623 comm="apparmor_parser"
audit: type=1400 audit(1512041490.766:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=623 comm="apparmor_parser"
audit: type=1400 audit(1512041490.766:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=623 comm="apparmor_parser"
audit: type=1400 audit(1512041490.818:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=627 comm="apparmor_parser"
audit: type=1400 audit(1512041490.818:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=627 comm="apparmor_parser"
audit: type=1400 audit(1512041490.826:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=622 comm="apparmor_parser"
audit: type=1400 audit(1512041490.826:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=622 comm="apparmor_parser"
audit: type=1400 audit(1512041490.826:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=626 comm="apparmor_parser"
audit: type=1400 audit(1512041490.826:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=626 comm="apparmor_parser"
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Adding 4078588k swap on /dev/sda5.  Priority:-1 extents:1 across:4078588k FS
usb 1-1.2: device descriptor read/64, error -110
usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=e004
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: Bluetooth USB Host Controller
usb 1-1.2: Manufacturer: Atheros Communications
usb 1-1.2: SerialNumber: Alaska Day 2006
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
systemd[1]: snapd.refresh.timer: Adding 5h 10min 19.836686s random time.
systemd[1]: snapd.refresh.timer: Adding 4h 58min 50.856115s random time.
systemd[1]: snapd.refresh.timer: Adding 2h 54min 39.154443s random time.
systemd[1]: snapd.refresh.timer: Adding 2h 24min 46.371238s random time.
systemd[1]: snapd.refresh.timer: Adding 34min 57.145047s random time.
systemd[1]: snapd.refresh.timer: Adding 16min 1.659016s random time.
systemd[1]: snapd.refresh.timer: Adding 4h 33min 44.079663s random time.
systemd[1]: snapd.refresh.timer: Adding 1h 15min 48.708165s random time.
systemd[1]: snapd.refresh.timer: Adding 3h 11min 39.297618s random time.
systemd[1]: snapd.refresh.timer: Adding 1h 55min 55.652019s random time.
systemd[1]: snapd.refresh.timer: Adding 5h 40min 45.815895s random time.
systemd: 29 output lines suppressed due to ratelimiting
audit_printk_skb: 36 callbacks suppressed
audit: type=1400 audit(1512044825.104:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=12650 comm="apparmor_parser"
audit: type=1400 audit(1512044825.104:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=12650 comm="apparmor_parser"
audit: type=1400 audit(1512044825.124:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=12650 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1   gen()  7892 MB/s
raid6: sse2x1   xor()  6229 MB/s
raid6: sse2x2   gen()  9778 MB/s
raid6: sse2x2   xor()  6934 MB/s
raid6: sse2x4   gen() 11514 MB/s
raid6: sse2x4   xor()  8259 MB/s
raid6: using algorithm sse2x4 gen() 11514 MB/s
raid6: .... xor() 8259 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function: avx
Btrfs loaded, crc32c=crc32c-intel
audit: type=1400 audit(1512044878.091:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=16906 comm="apparmor_parser"
audit: type=1400 audit(1512044878.095:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=16906 comm="apparmor_parser"
audit: type=1400 audit(1512044878.095:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=16906 comm="apparmor_parser"
audit: type=1400 audit(1512044878.095:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=16906 comm="apparmor_parser"
audit: type=1400 audit(1512044878.151:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=16910 comm="apparmor_parser"
audit: type=1400 audit(1512044878.179:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=16910 comm="apparmor_parser"
audit: type=1400 audit(1512044878.307:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=16914 comm="apparmor_parser"
audit: type=1400 audit(1512044878.331:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=16912 comm="apparmor_parser"
audit: type=1400 audit(1512044878.355:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=16912 comm="apparmor_parser"
audit: type=1400 audit(1512044878.411:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ippusbxd" pid=16918 comm="apparmor_parser"
audit_printk_skb: 36 callbacks suppressed
audit: type=1400 audit(1512044889.544:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=20580 comm="apparmor_parser"
audit: type=1400 audit(1512044889.560:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=20580 comm="apparmor_parser"
audit: type=1400 audit(1512044895.469:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=20723 comm="apparmor_parser"
audit: type=1400 audit(1512044895.469:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20723 comm="apparmor_parser"
audit: type=1400 audit(1512044895.469:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=20723 comm="apparmor_parser"
audit: type=1400 audit(1512044895.473:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=20723 comm="apparmor_parser"
audit: type=1400 audit(1512044904.455:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=20793 comm="apparmor_parser"
audit: type=1400 audit(1512044918.036:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=20977 comm="apparmor_parser"
audit: type=1400 audit(1512044918.056:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=20977 comm="apparmor_parser"
audit: type=1400 audit(1512044918.056:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=20977 comm="apparmor_parser"
audit: type=1400 audit(1512044918.080:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=20977 comm="apparmor_parser"
audit: type=1400 audit(1512044918.080:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=20977 comm="apparmor_parser"
audit: type=1400 audit(1512044918.112:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=20977 comm="apparmor_parser"
audit: type=1400 audit(1512052667.452:62): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=23323 comm="apparmor_parser"
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
docker0: port 1(veth8edac9e) entered blocking state
docker0: port 1(veth8edac9e) entered disabled state
device veth8edac9e entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth8edac9e: link is not ready
eth0: renamed from veth9136c50
IPv6: ADDRCONF(NETDEV_CHANGE): veth8edac9e: link becomes ready
docker0: port 1(veth8edac9e) entered blocking state
docker0: port 1(veth8edac9e) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 1(veth8edac9e) entered disabled state
veth9136c50: renamed from eth0
docker0: port 1(veth8edac9e) entered disabled state
device veth8edac9e left promiscuous mode
docker0: port 1(veth8edac9e) entered disabled state
docker0: port 1(veth690e9a1) entered blocking state
docker0: port 1(veth690e9a1) entered disabled state
device veth690e9a1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth690e9a1: link is not ready
eth0: renamed from veth96570b3
IPv6: ADDRCONF(NETDEV_CHANGE): veth690e9a1: link becomes ready
docker0: port 1(veth690e9a1) entered blocking state
docker0: port 1(veth690e9a1) entered forwarding state
perf: interrupt took too long (2582 > 2500), lowering kernel.perf_event_max_sample_rate to 77250
perf: interrupt took too long (3239 > 3227), lowering kernel.perf_event_max_sample_rate to 61750
INFO: task Xorg:1010 blocked for more than 120 seconds.
      Not tainted 4.8.0-36-generic #36~16.04.1-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Xorg            D ffff917d9854fca8     0  1010    953 0x00400004
 ffff917d9854fca8 ffff917d30e52bc0 ffff917d99c42b80 ffff917d924e3a00
 ffff917d99198c00 ffff917d98550000 ffff917d9179006c ffff917d924e3a00
 00000000ffffffff ffff917d91790070 ffff917d9854fcc0 ffffffff89491d45
Call Trace:
 [] schedule+0x35/0x80
 [] schedule_preempt_disabled+0xe/0x10
 [] __mutex_lock_slowpath+0xb9/0x130
 [] mutex_lock+0x1f/0x30
 [] i915_gem_set_tiling+0x9d/0x480 [i915]
 [] drm_ioctl+0x1e7/0x4c0 [drm]
 [] ? i915_gem_object_create_stolen_for_preallocated+0x2f0/0x2f0 [i915]
 [] ? timerqueue_add+0x59/0xb0
 [] ? enqueue_hrtimer+0x3d/0x90
 [] ? hrtimer_start_range_ns+0x1d6/0x3e0
 [] do_vfs_ioctl+0xa1/0x5f0
 [] ? __sys_recvmsg+0x51/0x90
 [] SyS_ioctl+0x79/0x90
 [] entry_SYSCALL_64_fastpath+0x1e/0xa8
usb 2-1.4: USB disconnect, device number 4
usb 2-1.4: new low-speed USB device number 5 using ehci-pci
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c077
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Optical Mouse
usb 2-1.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C077.0004/input/input13
hid-generic 0003:046D:C077.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
usb 2-1.4: USB disconnect, device number 5
usb 2-1.4: new low-speed USB device number 6 using ehci-pci
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c077
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Optical Mouse
usb 2-1.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C077.0005/input/input14
hid-generic 0003:046D:C077.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
perf: interrupt took too long (4104 > 4048), lowering kernel.perf_event_max_sample_rate to 48500
Chrome_~dThread[3533]: segfault at 0 ip 00007fb06c3178c6 sp 00007fb06a414af0 error 6 in libxul.so[7fb06b4de000+5826000]
Chrome_~dThread[3487]: segfault at 0 ip 00007fa89fd178c6 sp 00007fa89de14af0 error 6 in libxul.so[7fa89eede000+5826000]
TVGuiSlave.64[8359]: segfault at 10 ip 00000000004e51c7 sp 00007ff2f33e5300 error 4 in TVGuiSlave.64[400000+496000]
usb 2-1.2: new high-speed USB device number 7 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0930, idProduct=6545
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: DataTraveler 2.0
usb 2-1.2: Manufacturer: Kingston
usb 2-1.2: SerialNumber: 1C6F654FF40FEE30491108A3
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb 2-1.2: USB disconnect, device number 7
sd 4:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 4:0:0:0: [sdb] Sense not available.
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdb] Asking for cache data failed
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 4:0:0:0: [sdb] Sense not available.
sd 4:0:0:0: [sdb] Attached SCSI removable disk

Return To Western Digital WD5000AAKX-7 System Information